The Agilent E4980A Precision LCR Meter offers the highest accuracy and repeatability from 20 Hz to 2 MHz, and supports LAN, USB and GPIB PC connectivity. Unlike competing LCRs, the E4980A offers fast measurement speed and outstanding performance at both low and high impedance. Compared with Agilent's 4284A LCR, the E4980A provides measurements 5 times faster, a modern PC interface, compact size and additional features to further enhance your design and test productivity.

The 4263B LCR meter is Agilent Technologies' most cost-effective low-end LCR meter, designed for both component evaluation on the production line and fundamental impedance testing for benchtop applications. In addition to fundamental impedance measurements at test frequency of 100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz (20 kHz with option 002), the 4263B provides convenient transformer measurement with option 001.

Sharing a bench LCR meter is practical, but isn’t always convenient. With Agilent’s new line of handheld LCR meters, you can perform quick, basic LCR measurements at your convenience. Better yet, our handheld models extend the tradition of our industry-leading benchtop units to a lower price point. Now, everyone on your team can be equipped for passive-component testing—on the bench or on the go—without the wait.

The U1731B is now available, with the same outstanding performance and reliability of the U1731A, but in bright orange casing. Designed to give maximum visibility, the vivid color underlines Agilent commitment to safety in each of its handhelds.

Sharing a bench LCR meter is practical, but isn’t always convenient. With Agilent’s new line of handheld LCR meters, you can perform quick, basic LCR measurements at your convenience. Better yet, our handheld models extend the tradition of our industry-leading benchtop units to a lower price point. Now, everyone on your team can be equipped for passive-component testing—on the bench or on the go—without the wait.

Save more by ordering your meter with Option-SMD, consisting of a soft carrying case (U1174A) and an SMD tweezer (U1782A).

Note: This option is only available when ordered together with the meter, and cannot be back-ordered.

Capacitance meters do not always need to be on the bench. Neither do they always need to strain your budget. Agilent’s new U1701A capacitance meter now puts the capacitance meter into the palm of your hand – while doing random checks across the production floor or performing checks at your inspection or sorting stations. With wide measurement range, and features to ease your sorting tasks, the U1701A puts a new level of convenience into the world of capacitance meters.

Save more by ordering your meter with Option-SMD, consisting of a soft carrying case (U1174A) and an SMD tweezer (U1782A).

Note: This option is only available when ordered together with the meter, and cannot be back-ordered.

12 Hz – 10 kHz LCR Meter.

12 Hz – 200 kHz LCR Meter.Features:

Measures in L, C, R, |Z|, Q, and D, displays component value, Q or D, Delta or Delta %, 5-digit display for component value and Q/D, auto ranging or range hold, built-in comparator with 4 bin-sorting function, open- and short-circuit calibration for accurate zeroing, series and parallel equivalent circuit modes.
 

NIST Trace Calibration Certificate for B845; B4100; or Z9216.

The 16089B makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures. It is equipped with two insulated Kelvin clips.

• Measurement Instrument: 4192A, 4194A (Impedance Mode), 4263B, 4278A, 4284A, 4285A and E4980A
• Frequency: 5Hz to 100kHz
• DC Bias: -42V to +42V
• Operating Temperature: 0 to 55degC
• Terminal Diameter: 7.9mm or less
• Cable Length: Approx.0.94m (from connector to clip tip)
• Terminal Connection: BNC, 4 terminal-pair

The 16089D makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures. It is equipped with four alligator clips.

• Measurement Instrument: 4192A, 4194A (Impedance Mode),4263B, 4278A, 4284A, 4285A and E4980A
• Frequency: 5Hz to 100kHz
• DC Bias: -35V to +35V
• Operating Temperature: 0 to 55degC
• Terminal Diameter: 5mm or less
• Clip: Four terminal (Agilentot,Hcur,Lpot, and Lcur)
• Cable Length: Approx. 0.94m (from connector to clip tip)
• Terminal Connection: BNC, 4 terminal-pair

The 16034E test fixture is designed for impedance evaluations of SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1.6(L) x 0.8(W) [mm].

The Agilent 16048A test leads extend the measurement port with a 4 terminal-pair configuration. It is provided with a BNC female connector board to allow the attachment of user-fabricated test fixtures.