The Agilent N2779A power supply provides clean dc power for the N2780A/81A/82A/83A current probe. Three 12 V outputs allow for up to three N2780As to be connected enabling you to make effective three phase power measurements. This power supply is an universal AC input power supply covering 100VAC - 240VAC 50/60Hz AC input.

This power supply is designed specifically for use with the N2780A/81A/82A/83A AC/DC current probe to ensure safe operation. This power supply also works with the discontinued N2774A current probe.

The Agilent U1818A 100 kHz to 7 GHz active differential probe makes it easy to perform high frequency in-circuit measurements using network, spectrum and signal source analyzers. With flat frequency response, low noise floor, and direct power from instrument connection, the U1818A allows measurements to be made while taking full advantage of Agilent's RF analyzers dynamic range.

Use the N2790A 100-MHz high-voltage differential probe to make safe and accurate floating measurements with an oscilloscope. The N2790A probe allows conventional earth-grounded Agilent oscilloscopes to be used for floating signal measurements of up to 1,400 V of differential voltage and 1,000 V of common mode voltage.

Thanks to its high bandwidth and excellent input-impedance characteristics, the probe can accurately measure up to 3.5 nsec of fast transient edges in modern switching power supplies.

The probe is compatible with Agilent’s AutoProbe interface with 1 Mohm input where the probe’s power is supplied by the Agilent oscilloscope’s probe interface.

The N2881A DC blocking capacitors can be used in series with the N2880A InfiniiMax in-line attenuator to block out unwanted DC components of the input signal up to 30 V.

Download Agilent Oscillscope Probes and Accessories Selection Guide

The N2786A is a low-cost, easy-to-use XY axis probe positioner for general purpose probing applications. It requires no controls to position it into place.

• Three different sized apertures into which various sized probes can be placed

• All of Agilent’s 2.5 mm and 5 mm passive probes (N2870A-76A, 10073C, 10074C, N2862A, N2863A, 1165A etc.)
• Most other passive probes on the market

The Agilent N2879A fine pitch accessory kit offers the ideal set of accessories needed for probing fine pitch ICs and components with N2870A Series passive probes. The kit includes IC caps, insulating cap, protection cap, ground spring, ground blade, replacement probe tips, dual-lead adapters, hook tip adapter, PCB adapters, IC clips, SMD clips and 2-leg probe positioner (N2786A).

Refer to the N2870A Series passive probe data sheet (with Agilent literature number 5990-3930EN) or N2870A Series passive probe user’s guide (with Agilent literature number N2876-97000) for the details of the accessories included in the N2879A fine pitch accessory kit.

The Agilent N2877A Deluxe accessory kit contains various probe tip accessories, ground leads, probe tip adapter, IC clips and 2-leg probe positioner (N2786A) for N2870A Series passive probes to meet every demanding application. Use the optional accessories to access to signals and components that are difficult to probe.

Refer to the N2870A Series passive probe data sheet (with Agilent literature number 5990-3930EN) or N2870A Series passive probe user’s guide (with Agilent literature number N2876-97000) for the details of the accessories included in the N2877A deluxe accessory kit.

The N2875A passive probe offers DC to 500 MHz and 20:1 attenuation factor to address a wide range of measurement needs.

Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Agilent N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today’s high-speed digital applications.

The N2873A passive probe offers DC to 500 MHz and 10:1 attenuation factor to address a wide range of measurement needs.

Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Agilent N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today’s high-speed digital applications.

The N2871A passive probe offers DC to 200 MHz and 10:1 attenuation factor to address a wide range of measurement needs.

Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Agilent N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today’s high-speed digital applications.

The sharp probe tip is spring loaded to help engineers keep the probe from slipping off the device under test. Insulating IC caps keep the small probe tip centered on the IC lead and keep it from shorting adjacent leads.

Compatible with any oscilloscope with high impedance BNC input, the new N2783A Series current probe offers accurate and reliable solution for measuring ac and dc currents.

Using a hybrid technology that includes a Hall effect sensor and an AC current transformer, the probe provides accurate measurement of DC or AC currents up to 30 Arms continuous.

The current probe features flat frequency response, low noise and low insertion loss that make the probes ideal for current measurements in such areas like measuring steady state or transient current of motor drive, switching power supplies, inverters, controllers, disk drives, LCD displays, electronic ballast and current amplifier driving inductive loads.