Test Equipment Categories › Pulse Generators

Pulse Generators


 
Agilent 81150A Pulse Function Arbitrary Noise Generator
SKU: Agilent 81150A

Engineered for the best signal generation

 
  • High precision pulse generator is enhanced with a versatile signal generator, offering distortion capabilities to stress your device to its limit
  • Arbitrary bit-shaped pattern generator for ideal and distorted pattern up to 120 Mbit/s.
  • Function arbitrary generator provides versatile waveforms and modulation capabilities to adapt the signal to devices requirements
$0.00
 
Agilent 8114A High Power Pulse Generator, 100 V / 2 A 
SKU: Agilent 8114A

This single-channel instrument provides fast, clean pulses to test telecommunications and computers systems with high-voltage, high-current devices such as laser and IR diodes, EEPROMS and flash memories.

$26,153.00
 
Agilent 81101A; 50 MHz Pulse Generator
SKU: Agilent 81101A

The Agilent 81101A 50 MHz single-channel pulse generator is the low-end of the 81100 family. All timing parameters (repetition rate,delay, width and transitions) are variable. The instrument includes an additional PLL oscillator which allows the repetition rate to be set with 0.01% accuracy. Double-pulses and pulse bursts are available. These and single pulses can be triggered externally when the PLL is off. Bursts can also be triggered by the internal PLL when not in use as the repetition-rate generator. There is also an external width (pulse recovery) mode. The selectable 50 / 1000 ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50-ohm load.
 

$9,260.00
 
Agilent 81104A; 80 MHz Pulse/Pattern Generator Mainframe
SKU: Agilent 81104A

The Agilent 81104A 80 MHz single-/dual-channel pulse/pattern generator mainframe requires at least one output module – order two for dual-channel operation.

Building on the 81101A's capabilities, the 81104A extends the frequency and adds RZ/NRZ pattern capability up to 16 kbit per channel. An NRZ strobe channel provides a trigger at any desired point in the pattern, or can be used as an additional pattern source. If two 81105A Output modules are fitted, the outputs can be added. This allows different pulse shapes for simulating glitches, testing clock-recovery circuits or generating 3- or 4- level codes. Channel-add and 1000-ohm source modes each operate up to about 60 MHz. Combined, the maximum speed is about 15 MHz.
 

$6,442.00
Agilent 81105A; Output Channel Module for 81104A
SKU: Agilent 81105A

Output channel module for 81105A (order 2 for dual-channel output).

$4,563.00