Availability: In Europe and Asia only, Japan starting July 1, 2008 and Americas starting August 1, 2008.

The U2761A is a 20MHz function generator that offers 11 standard waveforms plus pulse and arbitrary waveforms generation capabilities. It uses the common non-proprietary standard high-speed USB 2.0 interface that provides ease of connectivity ? allowing users to set up and configure their test swiftly with the plug and play feature. It comes bundled with the Agilent Modular Instruments Measurement Manager for quick setup to perform measurement. Users are able to customize waveform by drawing in the arbitrary waveform editor.

The Agilent 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. Getting connected has never been easier.

Key Specifications

• Plug and play interface
• USB 2.0 interface (USB 1.1 compatible) and IEEE 488 interface (connect up to 14 GPIB instruments)
• Standard - industry libraries mean you don´t rewrite software. IO Libraries Suite 15.0 now shipping
• High-speed - transfer over 1.15MB/sec
• Added feature - Parallel Polling (check response of up to 8 devices at one single poll)

The TH-03 temperature data logger provides high accuracy temperature data logging at a low cost: 

• 3-channel temperature data logger
• High accuracy at a low cost
• Connects to computer serial port
• No power supply required
• Supplied with data acquisition software
• Works with EnviroMon sensors (temperature, light, door switch)

The TH-03 allows up to 3 channels of temperature to be recorded onto your PC. It uses precision resistive sensors to give an accuracy that was previously only obtainable using expensive platinum PT100 sensors.

The Agilent U2941A is a parametric test fixture that is designed to complement the usage of U2722A USB source measure unit in the testing of semiconductor components, including SMT and DIP ICs.

The U2941A has 3 input channels and a common ground and comes with 5 types of socket modules for device under test (DUTs) of various pin configurations.

The parametric test fixture also comes bundled with Parametric Measurement Manager software to kick start your set-up, testing and data recording sooner!

This calibrated 250 MHz oscilloscope probe is optimised for use with the PicoScope 5000 Series of high-performance oscilloscopes.

Type K Thermocouple (Exposed wire, PTFE insulated)

• Tip Diameter: 1.5 mm
• Tip Temperature: -75 to +250 °C

This high quality general purpose oscilloscope probe, has a 60MHz bandwidth. A two position slide switch allows attenuation of either x1 or x10 to be selected. Please note that the x10 function will not work with the ADC-10 or ADC-12 as the input impedance of these devices is not the same as a standard oscilloscope.

Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 Multi-Channel DAQ Series feature independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.

• Up to 16 input channels per data logger
• Up to 4 output channels per data logger
• Use up to 4 data loggers at the same time
• Up to 1 MS/s sample rate
• USB connected and powered
• Data acquisition software and SDK included

The Agilent E5805A USB/4-port RS-232 Interface provides a direct connection from the USB port on your notebook or desktop PC to up to four RS-232 instruments or devices.