Terminations (Loads)
Agilent 909C; Coaxial Termination, 50 Ohms
SKU: Agilent 909C The Agilent 909C is a precision, low-reflection DC to 2 GHz load for terminating a 50 Ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Agilent 909C may be ordered with an APC-7, type-N male, or type-N (female) connector.
$612.00
Agilent 909E; Coaxial Termination - DC to 3 GHz
SKU: Agilent 909E The Agilent 909E is a precision, low-reflection DC to 3 GHz load for terminating a 75 Ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.
$599.00
Agilent 909F; Termination - DC to 6 GHz, APC-7 Connector
SKU: Agilent 909F The Agilent 909F family of precision low reflection loads is intended for use as calibration standards. Tantalum nitride on sapphire thin-film technology is used for exceptional long-term impedance stability. To ensure the best possible wear resistance characteristics, gold-plated beryllium copper has been used for the connector contacts. The loads are available in APC-7, type-N (male) and type-N (female) configurations.
$832.00
Agilent 85138A; 2.4mm Termination - 50 Ohms, Male Connector
SKU: Agilent 85138A The Agilent 85138A is a precision, low-reflection DC to 50 GHz load for terminating a 50 Ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.
$876.00
Agilent 85138B; 2.4mm Termination - 50 Ohms, Female Connector
SKU: Agilent 85138B The Agilent 85138B is a precision, low-reflection DC to 50 GHz load for terminating a 50 Ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.
$968.00
Agilent 85140A; 2.4mm Short Circuit - Male Connector
SKU: Agilent 85140A The Agilent 85140A coaxial short is used for establishing measurement planes for known reflection phase and magnitude in 50 Ohm coaxial systems. It has a 2.4mm (male) connector.
$502.00
Agilent 85140B; 2.4mm Short Circuit - Female Connector
SKU: Agilent 85140B The Agilent 85140B coaxial short is used for establishing measurement planes for known reflection phase and magnitude in 50 Ohm coaxial systems. It has a 2.4mm (female) connector.
$731.00
Agilent 85141A; 2.4mm Open Circuit - Male Connector
SKU: Agilent 85141A The Agilent 85141A coaxial open is used for establishing measurement planes for known reflection phase and magnitude in 50 Ohm coaxial systems. It has a 2.4mm (male) connector.
$670.00
Agilent 85141B; 2.4mm Open Circuit - Female Connector
SKU: Agilent 85141B The Agilent 85141B coaxial open is used for establishing measurement planes for known reflection phase and magnitude in 50 Ohm coaxial systems. It has a 2.4mm (female) connector.
$806.00
Agilent 34104A; Low Thermal Input Connector
SKU: Agilent 34104A The Agilent 34104A is a low-thermal input connector that mates with the 34420A. It allows a user to design custom input connections.
$97.13
|
