The Agilent U281A adapter transforms waveguide transmission line into 50-ohm coaxial line. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3.
 

Key Specifications

The Agilent 85130E test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged (female) connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard (male) connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains two 2.4mm to 7mm adapters. The frequency range for these adapters is DC to 18 GHz with a return loss of 26 dB or better.
 

The Agilent 85130G test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged (female) connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard (male) connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 2.4mm to PSC-2.4mm (male) adapter and a 2.4mm to PSC-2.4mm (female) adapter. The frequency range for these adapters is DC to 50 GHz with a return loss of 23 dB or better.
 

The Agilent 85130C test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged (female) connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard (male) connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 3.5mm to type-N (male) adapter and a 3.5mm to type-N (female) adapter. The frequency range for these adapters is DC to 18 GHz with a return loss of 28 dB or better.
 

The Agilent 11921H precision 1.85 millimeter coax-to-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms impedance and frequency range from dc to 67 GHz.

The Agilent 11922B precision 2.4mm coaxial in adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 Ohms impedance and a frequency range from DC to 50 GHz.

The Agilent 11922D precision 2.4mm coaxial in adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 Ohms impedance and a frequency range from DC to 50 GHz.

The Agilent 83059A instrument-grade 3.5mm (male) coaxial adapter offers outstanding performance to 26.5 GHz. With SWR typically better than 1.05, this adapter is ideal for most connector saver and interconnect needs.
 

Key Specifications

The Agilent 83059C instrument-grade 3.5mm coaxial adapter offers outstanding performance to 26.5 GHz. With SWR typically better than 1.05, this adapter is ideal for most connector saver and interconnect needs.
 

Key Specifications

The Agilent 86211A adapter kit contains three type-N to type-F 75 Ohm instrument-grade adapters, necessary when measuring type-F devices on network analyzer with type-N ports.

The kit includes:

one 1250-2350 Adapter, DC to 2 GHz, type-F (female) to type-F female

one 1250-2368 Adapter, type-N (female) to type-F male

one 1250-2369 type-N (male) to type-F male.
 

The Agilent 11904A is a metrology-grade, 2.4mm (male) to 2.92mm (male) adapter with DC to 40 GHz operation. It is 16.4mm in length and has a diameter of 9mm.
 

Key Specifications