Power Dividers & Splitters
Agilent 11667L DC to 2 GHz Power Splitter with BNC connector
SKU: Agilent 11667L The Agilent 11667L is a 50 ohm two-resistor type power splitter with BNC connectors. It is used with the E5061B network analyzer for power distribution network applications, such as DC-DC converter output impedance measurements with shunt-thru method (100 Hz to 10 MHz). It provides excellent amplitude (<0.2 dB) and phase tracking (+/-3), ensures highly accurate power splitting and low SWR minimizes measurement uncertainty.Superior RF performance
$402.00
Agilent 11636C; Power Divider, DC to 50 GHz
SKU: Agilent 11636C The Agilent 11636C is a DC to 50 GHz power divider that provides highly accurate direct power dividing and combining. Excellent phase and amplitude tracking ensure accurate impedance matching of all three ports, which improves the fault location measurement by reducing re-reflections and intermodulation distortion. Key Specifications
$1,450.00
Agilent 11691D; Coaxial Directional Coupler - 2 GHz to 18 GHz
SKU: Agilent 11691D The Agilent 11691D is a single coupler for 2 to 18 GHz with a 20 dB coupling factor. With 30 dB directivity to 8 GHz and 26 dB to 18 GHz, it is useful for broadband reflectometry.
$6,870.00
Agilent 11636A; DC to 18 GHz Power Divider - Type-N, 50 Ohms
SKU: Agilent 11636A The Agilent 11636A is a DC to 18 GHz power divider for direct power dividing applications.
$815.00
Agilent 11636B; DC to 26.5 GHz Power Divider - APC-3.5
SKU: Agilent 11636B The Agilent 11636B is a DC to 26.5 GHz power divider for direct power dividing applications. The excellent impedance match of all three ports improves fault location measurements by reducing re-reflections. The Agilent 11636B power divider/combiner is recommended when making wideband comparison measurements with the Agilent 8757 scalar vector network analyzer.
$1,458.00
Agilent 11667B; DC to 26.5 Ghz Power Splitter - APC to 3.5
SKU: Agilent 11667B  The Agilent 11667B power splitter is recommended when making wideband ratio measurements using an Agilent 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the auxiliary arm when used for source leveling or ratio measurement applications. The tracking between output arms over a frequency range from DC to 26.5 GHz allows wideband measurements to be made with a minimum of uncertainty.
$1,455.00
Agilent 11667C; DC to 50 GHz Power Splitter - 50 Ohms
SKU: Agilent 11667C The Agilent 11667C power splitter is recommended when making wideband ratio measurements using an Agilent 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the auxiliary arm when used for source leveling or ratio measurement applications. The tracking between output arms over a frequency range from DC to 50 GHz allows wideband measurements to be made with a minimum of uncertainty.
$2,173.00
Agilent 87302C; Power Divider - 5 to 26.5 GHz
SKU: Agilent 87302C The Agilent 87302C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports. It has insertion loss between the main line and output port that is 1 to 2 dB less than equivalent resistive power splitters. It is designed for critical signal processing applications; phase and amplitude tracking between the two output ports is controlled and specified.
$1,510.00
Agilent 87303C; Power Divider - 1 to 26.5 GHz
SKU: Agilent 87303C The Agilent 87303C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports.
$1,188.00
Agilent 87304C; Power Divider - 2 to 26.5 GHz
SKU: Agilent 87304C The Agilent 87304C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports.
$973.00
|
