Agilent Noise Sources
Agilent Q347B Millimeter-Wave Noise Source, Q-band, 33 to 50 GHz
SKU: Agilent Q347B The Agilent Q347B noise source covers a 33 to 50 GHz frequency range. This waveguide noise source allows you to make accurate and convenient noise figure measurements on millimeter-wave devices. The Q347B provides highly precise broadband noise at the input of the system or component under test. The noise figure meter then processes the ON/OFF ratio of noise power present in the system IF, and provides an accurate reading of noise figure and gain. The Q347B noise source has remarkable ENR stability over time, which allows longer recalibration cycles and more accurate noise figure measurements.
$4,418.00
Agilent R347B Millimeter-Wave Noise Source, R-band, 26.5 to 40 GHz
SKU: Agilent R347B The Agilent R347B noise source covers a 26.5 to 40 GHz frequency range. This waveguide noise source allows you to make accurate and convenient noise figure measurements on millimeter-wave devices. The R347B provides highly precise broadband noise at the input of the system or component under test. The noise figure meter then processes the ON/OFF ratio of noise power present in the system IF, and provides an accurate reading of noise figure and gain. The R347B noise source has remarkable ENR stability over time, which allows longer recalibration cycles and more accurate noise figure measurements.
$3,625.00
Agilent N4002A SNS Series Noise Source 10 MHz to 26.5 GHz (ENR 15 dB)
SKU: Agilent N4002A The SNS series N4002A noise source was designed to measure DUT noise figures reliable and accurately up to 30 dB from 10 MHz to 26.5 GHz. This noise source comes with an APC 3.5 connector as standard.
$3,737.00
Agilent N4001A SNS Series Noise Source 10 MHz to 18 GHz (ENR 15 dB)
SKU: Agilent N4001A The SNS series N4001A noise source is ideal for general purpose use with a low reflection coefficent and a nominal ENR of 15 dB from 10 MHz to 18 GHz. DUT's with noise figures up to 30 dB can be measured accurately and reliably with this device. The N4001A has a selection of connectors, with an APC 3.5(m) connector as standard.
$2,983.00
Agilent N4000A SNS Series Noise Source 10 MHz to 18 GHz (ENR 6 dB)
SKU: Agilent N4000A The SNS series N4000A is a 10 MHz to 18 GHz noise source with nominal ENR 6 dB. The N4000A noise source is designed for accurately measuring devices with low noise figure, or devices whose gain is especially sensitive to small changes in source impedance. DUT's with noise figure up to 20 dB can be accurately and reliably measured with this device. The N4000A noise sources has a choice of connectors, with an APC 3.5(mm) connector as standard.
$3,139.00
Agilent 346C Noise Source, 10 MHz to 26.5 GHz, nominal ENR 15 dB
SKU: Agilent 346C The Agilent 346C noise source is the ideal companion to Agilent's noise figure solutions. Since it is broadband (10 MHz to 26.5 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. Option K01 is a coaxial noise source and features coverage from 1 to 50 GHz with a 2.4 mm coaxial connector.
$4,065.00
Agilent 346B Noise Source, 10 MHz to 18 GHz, nominal ENR 15 dB
SKU: Agilent 346B The Agilent 346B noise source is the ideal companion to Agilent's noise figure solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. The 346B's high ENR, low SWR, and variety of connectors make it a general-purpose noise source. Add special option H01 for high ENR (21 dB typical) to measure high noise figure devices, or option H42 for measuring Direct Broadcast Satellite (DBS) low noise block converters.
$2,257.00
Agilent 346A Noise Source, 10 MHz to 18 GHz, nominal ENR 6 dB
SKU: Agilent 346A The Agilent 346A noise source is the ideal companion to Agilent's noise figure solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. The very small change in reflection coefficient (<0.01) from ON to OFF is designed especially for accurate characterization of input-impedance-sensitive devices (like GaAsFETs and many UHF amplifiers).
$2,381.00
|
